Top 10 Home Theatre Power Manager – Full Guide
Electrical fluctuations can inflict catastrophic harm to our electronic devices, such as air conditioners and home theatre systems, when they occur. Utilizing a Home Theater Power Manager, you can keep your equipment safe during power outages or when using tainted electricity. It could cause long-term damage if the condition is not managed by a conditioning device, often known as a “power conditioner.”
By protecting against power surges, a Theater Power Manager (TPM) can deliver the best of both worlds. While doing so, it provides clean, stable, regulated alternating current for audio/video equipment needs in any environment with minimal interference from external noise sources such as motors, whether it’s indoors where there may not be enough distance between outlets and all rooms require individual feeders, or outdoors in open areas where there may not be enough distance between outlets and no individual feeders.
It explains how to use electricity. A power conditioner is absolutely necessary. It filters “dirty” power, keeping your home theatres safe and allowing them to function more efficiently for longer periods of time.
Small fluctuations and surges in the energy that goes through your home theatre might damage the equipment within. This is what a power conditioner accomplishes, and it serves as a safety device for any connected equipment.
We’ll go over power managers and power conditioners in greater depth in this piece. We’ll go over why you need a “power manager,” what power conditioning is, and what to look for when buying a home theatre power manager or power conditioner in this video. We’ll also show you the top eight power conditioners on the market right now as a bonus. We’ll assist you in making a decent purchase because we’ve tried and evaluated everything. Continue reading to learn more.
What is a Home Theater Power Manager?
The power management system in your home theatre optimises AC power distribution, protects against surges, and filters dirty electricity (reduces or eliminates noise). Features such as sequential system power ON/OFF, over/under voltage safety, and so on can add to the system’s complexity (and expense).
In a home theatre system, a home theatre power manager serves two purposes. First, it should improve the quality of electricity, distribute it appropriately, and reduce noise to improve the operation of your home entertainment system. Second, it should protect your gadget from power surges while also extending its lifespan.
They also create a more orderly and cleaner environment. All cords are hidden and connected to the back of the power manager. Instead of multiple power strips strewn over the room, your power management will be connected to only one device.
What is Home Theater Power Manager used for?
The following are some of the applications for Power Managers:
A home theatre power management is intended to improve the performance of a home theatre system by improving the effective distribution of power, lowering noise, and improving the quality of energy while extending the device’s lifespan. Most power managers remove filthy power flow from AC power by removing and lowering AC noise, as well as regulating device power distribution.
They are critical in protecting the home theatre and other devices from power outages, which are frequently caused by lightning and storms, resulting in damage to the electrical equipment in the home. It also ensures that all wires are neatly tucked away and not dispersed, resulting in a more organised and cleaner atmosphere. At the back of the home theatre power manager, all the cables are hidden and connected.
What is the Home Theatre Power Manager?
Home Theatre Power Managers act as a buffer between your system and the outlet, smoothing out voltage fluctuations that can degrade your device’s performance. The objective of a home theatre power manager is to clean and condition electrical power before it reaches the devices connected to it. When utilising the home theatre power conditioner, you need be aware of the basic functions.
When it comes to controlling your devices, turning them on and off will be crucial. It manages the AC power distribution and provides both surge protection and power filtering. Some features, such as the amount of protection and the quality of the filtration, may vary depending on the price. You’ll gain superior protection for your equipment’s longer lifespan, electrical quality, and proper power distribution at the very least.
Is a Surge Protector the Same as a Power Conditioner?
A power conditioner and a surge protector are two separate pieces of equipment that perform similar but not identical functions. Surge protectors, also known as surge suppressors or power strips, are designed to protect equipment from harm caused by power surges and impulses. Surge Protector Illustration When the voltage hits clamping voltage, the impulse is securely diverted to ground in your building’s electrical system, away from your equipment. Attaching a device to a surge-protected power strip is far safer than connecting it to a wall outlet directly.
The surge protector, unlike the power conditioner, does not prevent power fluctuations and ensures that the noise voltage is cleaned up. Surge protectors, unfortunately, do little to defend against other power-related hazards. Surge protectors vary in terms of effectiveness and construction, and different models utilise different approaches to balance response times and high clamping voltage. Surge protectors are the least expensive pieces of equipment, while home theatre power managers are the most expensive yet offer the most benefits. A surge-protected power strip would function good if your output electric power is not filthy. With filthy electricity, however, power managers or conditioners are required.
Are Power Conditioners in Home Theaters Worth It?
Even if some of the components are affordable, most home theatres are created using pricey equipment. Whether it’s an expensive receiver, subwoofer, front speakers, or all of the above, protecting your audio equipment from harm should be your top priority. As a result, a power conditioner is an essential piece of equipment for filtering out filthy power and power surges, as well as keeping your pricey equipment safer and more efficient. It assists in extending the life of your equipment.
Why Is a Power Manager Required for Expensive Home Theater Equipment?
A home theatre system is made up of many distinct components that all cost a significant amount of money. A high-priced subwoofer, speaker set, or receiver could be the culprit. To protect this expensive electrical equipment from power spikes, users should utilise a power manager or power conditioner.
We frequently take precautions to protect ourselves from physical danger, but we rarely consider what can happen on the inside. Just like the human body, it’s usually easier to fix things that are outside of the body than things that are inside. People should use power conditioners to keep the inside of the equipment healthy against a variety of items that can cause problems. This is exactly what they ought to do. It will not only keep your home theatre system safe, but will also extend its lifespan.
Surge protection and power conditioning are two different things. What is the difference between them?
Surge protectors (also known as surge diverters) and power conditioners are two types of devices that are frequently confused. To determine which one you may require for your home theatre, you must first understand the differences.
Surge protection appears to give very basic protection for your home theatre system. Power conditioning, on the other hand, safeguards your entire home theatre setup. Let’s take a closer look at the distinction.
The protection against surges
A surge protector operates like this: It is set to a given level of electricity. Unless the power flowing through it exceeds a particular threshold, it won’t change. When the flow of power exceeds a specific threshold or when there are power surges, the power is cut off.
When there is lightning or a power outage, the ac power may not be equally distributed across the room. Your electrical equipment may become overloaded as a result of this. Surge protectors prevent this from taking place.
The Power Conditioner
A line conditioner takes in electricity and adjusts it to meet the needs of the equipment. Power conditioners are used to modify the flow of power to satisfy the needs of some systems that have very tight or unusual power tolerances.
A “noise filter” is also included. This is yet another crucial component of a power conditioner. Noise is removed with the noise filter. It frequently occurs when someone switches on the blender when we are watching TV or listening to music through our speakers. This is referred to as “noise.” The power conditioner has a noise filter built in to ensure we don’t hear this unpleasant noise.
Surge protection and power conditioners are incorporated into a lot of devices these days. Both serve a role and can aid in the protection of your belongings.
Consider these factors when purchasing a power management or power conditioner for your home theatre. For some people, a power manager is not the ideal option. Let’s take a look at some key considerations when purchasing a power management or power conditioner.
Isn’t the most crucial item usually always the budget? However, this is a two-pronged situation in this case. First, consider how much your home theatre system costs or how inexpensive it is. The value of a home theatre system can help you determine how much money you should spend on a home theatre power manager.
More expensive power managers have more outlets, which are more filtered and protected. Some of the less expensive solutions might not have as many outlets or be as good at what they do. We don’t think it’s a good idea to be inexpensive if your home theatre is expensive. Allow it the time it requires.
There is a connection between price and quality. If you want to acquire an excellent deal, it’s best to spend more money (mostly). When performing a quality check on your power manager, there are a few things to keep in mind.
To begin with, it should have numerous outlets for you to use. Second, how effective is the power management at filtering out noise? You should also consider the appearance of your air conditioner.
The quantity of outlets
It’s always preferable to have more outlets than you actually need. You won’t have to worry about it if you ever need more. A power conditioner or power manager often comes with 6 to 12 outlets, which is plenty.
The location of these outlets is something that many people overlook. It’s important to remember that different types of plugs are used for different purposes. Some power adapters may be little, while others may be quite large. If this is the case, installing it next to an outlet that already has a plug becomes increasingly challenging.
If there are a lot of outlets on it, then it will become even larger. Users need to check that they have adequate storage space before installing a particular power manager.
Some power managers can be mounted on the wall if that’s more convenient. There are other power managers that are designed to be mounted on racks. Users have the option of positioning their power managers at the very top or very bottom of their racks.
Rate of Filtration
There are two primary rating types. The clamping voltage comes first, followed by the amount of energy it can store. Clamping voltage is the voltage level at which a surge protector in a power manager begins to shut down when the voltage reaches an extremely high level. There are numerous varieties of power managers. Most clamping voltages range from 120 to 400V.
The term “energy absorption rating” is utilised by those who operate with power. This is the maximum amount of power a power management can absorb and handle.
What is Dirty Power?
Power that is contaminated by high-frequency noise, spikes, and surges. Dirty power makes it difficult to operate sensitive home theatre equipment. Inconsistent power supplies can cause system failure by causing damage to home theatre components’ delicate circuitry. Electrical noise causes dirty electricity, which can damage sensitive equipment such as home theatre systems. Over time, electromagnetic fields from the surrounding environment degrade the electricity flowing from the wall outlet.
These fields are emitted by lights, microwaves, power cables, electrical motors, and other devices. As a result, low-quality electricity can harm, degrade, and disrupt sensitive electrical devices such as home theatre systems. This impacts any electrically plugged-in devices, not just home theatre systems. The majority of electrical equipment and home theatre systems are not protected from electrical noise or contamination.
Do I Need a Home Theater Power Manager?
While many audiophiles concur that power conditioners help maintain your equipment, their overall performance is contested by others. They assert that power conditioners can reduce or eliminate noise (dirty power), but they can also eliminate unnecessary noise. Consequently, the audio reproduction lacks vitality and energy. According to PS Audio, the majority of power conditioners “strip music of its vitality and mute the sound.” Was it their suggestion?
Paul McGowan endorses the power regenerators by PS Audio. Their power regenerators are excellent, however they are somewhat expensive. Some of them are significantly more expensive than a conventional power conditioner.
What if, however, you cannot afford it? Exists another option? Numerous audiophiles and home theatre aficionados engage in one activity. They install a dedicated line (or pay an electrician to do so) and a dedicated audio outlet.
Multiple home appliances in the United States share a single source of electricity. The noise from these devices can affect your home entertainment system badly. By establishing a dedicated line for your home theatre (or just your amplifier/AVR), you can eliminate this issue. Without a power conditioner, you will enjoy cleaner power and sound without sacrificing performance. Depending on the complexity of the task, adding a new dedicated line can cost between $200 and $1,000.
A dedicated line can reduce noise and improve the efficiency of the power supply, but it cannot protect your equipment against power surges, undervoltages, or overvoltages. This requires a surge protector at minimum (preferably a power manager).
How Much Power Do I Need?
Few people do not require it. Depending on your home’s electrical system, you may only require it for safety. But you may need it to perform better.
A home theatre power manager is not an option if you live in an area prone to lightning strikes or power surges. Even if power surges are rare, a home theatre power conditioner is useful… In case.
These days, dirty power is ubiquitous. The phrase describes various power quality irregularities. Frequency/voltage fluctuations and power surges are regular oddities. Dirty electricity can degrade audio equipment performance and, more significantly, cause malfunctions and irreparable damage. If you have similar problems at home, you require a power manager/conditioner.
Normal mode noise, a low-level signal that travels together with the original power transmission, is another source of dirty power. This noise can sometimes be heard via your speakers (if not filtered). Other devices connected to the same line can cause this noise. So if your speakers pop or hum when you switch on the light or the hairdryer, you have dirty power. A home theatre power manager could reduce noise and increase performance. A power conditioner cleans the power and thus the sound.
Top 10 Home Theatre Power Manager – Full Guide
Best Under $500 – Panamax MR5100
[amazon box=”B002CQTVQE” template=”horizontal” ]
We always propose a few brands to our readers. Our favourite home theatre power management is from Panamax, Furman, APC, Monster Power, and AudioQuest. Other companies (Pyle, Monoprice, etc.) make decent power managers, but for the best performance and protection, stay with the above brands. Our first unit is from Panamax. The MR5100 is a rack-mountable unit from the MR series. Aside from the MR series, Panamax provides a line for home theatres (PM) and a line for professionals (PRO series). The MR5100 is a sleek, small unit.
The front panel is easy to utilize. It has a power button and three LED indications for three power banks. In the center is a lovely voltage display. It has one power outlet and one USB port for charging phones and devices. Two indications are also on the display (lightning bolt and outlet). In case of under/overvoltage, the unit will turn off automatically (and will be turned on when the voltage returns to safe levels). The outlet indication shows a line fault. It flashes when a short circuit is detected. The outlets take up most of the back panel. Ten outlets in three separate power banks. Isolated power banks help reduce cross-contamination by ensuring that unclean power doesn’t infect other components’ power supplies.
Bank 1 has 4 (plus 1 front) outlets. These are always-on (UNSWITCHED). Bank 2 has two. These are SWITCHED (on/off) outlets. Bank 3 has four. 4 delayed SWITCHED high-current outlets They are made for the toughest machines (AVRs, amplifiers, subwoofers). Activation/deactivation is delayed (2-3sec).
The switching delay prevents overloading the circuit breaker and protects your equipment. The 11 outlets (10 back and 1 front) are all filtered. All outlets include surge protection. Phone and LAN inputs/outputs are also included (1 IN and 1 OUT).
It can safeguard all connected devices from surges. The rear panel has a ground lug and a fuse circuit breaker on the left. There’s no DC trigger. Panamax MR5100 peak current is 15A. (1800W). It can dissipate up to 2,025 Joules and clamp in less than 1ns. The item protects well and the filters sound well. There is no 12V DC trigger.
#1. Panamax MR4300 Power Line Conditioner and Surge Protector – Best Overall Home Theater Power Manager
[amazon box=”B00ILH7KJI” template=”horizontal” ]
When it comes to home theatre power managers, Panamax is a top brand. In the AV equipment protection industry, it is a pioneer. In our list of the best power managers for home theatres, its name will appear frequently. The Panamax MR4300 is the most effective home theatre power conditioner. The Panamax MR4300, for starters, is one of the greatest power managers available, with a sleek design and over 9 outlets. Automatic Voltage Monitoring technology is what makes it so good.
This ensures that power to your home theatre is shut off in the event of a brownout or a power spike. Even better, once normal voltage levels are restored, electricity is restored as well. In this case, the LED display displays a red indicator to alert the users. Second, its Protect or Disconnect technology can save your life in life-threatening situations. If a power surge occurs that exceeds the MR3400’s handling capacity, power to your home theatre system will be cut off permanently unless you restore it once things have calmed down.
Finally, the MR3400 is a leading AV equipment protection manager. The combination of automatic voltage monitoring and protect or disconnect technology provides the greatest protection against internal device damage. Furthermore, the $5,000,000 Limited Lifetime connected equipment protection coverage as well as the lifetime warranty are irresistible incentives.
#2. Panamax MR4000 8-Outlet Home Theater Power Management – Best Budget Home Theater Power Manager
[amazon box=”B009MQTC52″ template=”horizontal” ]
The Panamax MR4000 is one of the most affordable home theatre power managers available. It might be considered a less expensive and more budget-friendly version of the Panamax MR4300. To begin, the MR4000, like the MR4300, has an automatic voltage monitoring and protect or disconnect system. A 15-amp circuit breaker is also included.
This power manager differs from others in that it contains eight outlets (seven on the back panel and one on the front), no LED display, and no USB charging port. It also offers level 2 noise filtration, which falls just short of MR43oo’s level 3. However, the price difference is significant, so even missing out on the aforementioned changes appears to be worthwhile. Furthermore, the guarantee (albeit not lifetime) is very attractive, and the same $5,000,000 Limited Lifetime connected equipment protection coverage applies to this model as well.
Finally, the Panamax MR4000 is a great low-cost alternative to high-end power conditioners like the Panamax MR4300. It doesn’t have all of the features that would make it one of the top power manager models for home theatres, but it does more than enough for the price.
#3. Furman M-8X2 Merit Series 8 Outlet Power Conditioner and Surge Protector
[amazon box=”B003BQ91Y6″ template=”horizontal” ]
A Furman power conditioner, like a Panamax power conditioner, is always believed to be good. The Furman M-8X2 is one of the most basic but effective power conditioners available. People like power conditioners that are small enough to fit into their racks, and the M-8X2 Furman power conditioner fits the bill. To begin with, this budget-friendly power conditioner features 9 outlets, one of which is located in the front.
The basic level RFI/EMI filtration that decreases the noise floor caused by AC power is one of the main characteristics of this Furman power conditioner. For a device as inexpensive as the M-8X2, the filtration levels are excellent. Furman’s typical spike and surge protection protects your digital equipment against ordinary surges and spikes, preventing it from performing efficiently or properly. If you need another incentive to buy the M-8X2, the 15A capacity combined with the nine AC outlets will supply enough power to power your complete home studio.
To summarise, this small yet handy power conditioner will offer you with the necessary power and protection for your home cinema. It may not perform as well as the Panamax models discussed previously, but if rack-mountability and affordability are priorities, this is the way to go.
#4. Furman SS6B Power Conditioner
[amazon box=”B0002D017M” template=”horizontal” ]
Surprised that there is no model? Well, that is exactly how these are sold. Some people only require basic power conditioners and the best choice for them is the Furman Power Conditioner. This 6 outlet basic power conditioner is available in two variants, block variant and strip variant. It does include a surge protector and also has basic level EMI and RFI filters for your audio equipment. It doesn’t reduce noise contamination as much you’d like but what can you expect from such a basic level power conditioner?
To conclude, there isn’t much to say here. The Furman SS6B Power Conditioner is the best choice for those of you that only seek a non-expensive, basic level power manager that provides basic power conditioning. It will protect your equipment from power surges, thanks to its surge protector.
#5. Furman PL-8C 15 Amp, Advanced Level Power Conditioning
[amazon box=”B001J1LG2U” template=”horizontal” ]
The Furman PL-8C is the antithesis of a standard power conditioner in every possible way. It is one of the more advanced power conditioners, and in our opinion, it is the best “advanced” alternative, taking into account the price as well as other relevant considerations. There are nine AC power outlets available on the Furman PL-8C, and one of them is located in the front for your extra convenience.
There are two LED lamps on the front panel that can be retracted out of sight when not in use. These lamps can be used to illuminate an equipment rack or to add to the glow of your home cinema system. The PL-8C’s SMP technology, also known as Series Multi-Stage Protection, is the most impressive aspect of this device. How does it work?
The Furman SMP makes use of a network of components that, by absorbing unpredictable incoming line voltage and turning it to heat, mitigate the negative effects of potentially dangerous power surges. The remainder of the available energy is taken up by the apparatus. Together, the Extreme Voltage Shutdown circuitry system and this function to protect against dangerously high voltages.
#6. Pyle PC0860 Power Manager
[amazon box=”B072KPXD8F” template=”horizontal” ]
The substantial number of outlets, 19, is the aspect of this power manager that stands out as being the most striking characteristic. Yes, it does come with 19 outlets, and it also has one USB port. This exceeds the customary maximum number of outlets that power managers often have, which enables optimal utilisation because of the increased capacity. In addition to that, it has an installation design that allows the rack to be detached, and it can be mounted either on the wall or under the counter. The length of the power cable is 5 metres.
Your home theatre will be adequately protected by its built-in circuit breaker, and it will filter out unwanted noise as well. Its limited capabilities include its durability as well as the construction of its power manager. Following the completion of certain transactions, there have been a few complaints made about defective components.
#5. Furman M-8X2 Power Manager
[amazon box=”B003BQ91Y6″ template=”horizontal” ]
This power conditioner has a sturdy construction and is responsible for managing the flow of electricity. It does this by managing the energy supply, filtering filthy power, and cutting it off completely, which protects your home theatre. It protects your home theatre in a proactive manner and contains nine outlets, as well as an indication on the front to show that it is doing so.
It eliminates undesirable sounds and filters out background noise. Because it only has a meagre absorption rating of 150J, which is a very small number considering how important of a factor that is, it should come as no surprise that this power management is at the bottom of the list. However, despite its restricted capabilities, it still manages to be effective.
Power Conditioners: Frequently Asked Questions
Is it worthwhile to invest in home theatre power conditioners?
Yes, there is only one correct answer to this question, and it is a resounding yes. Home entertainment systems may be fairly expensive, so it only makes sense to extend their lifespan. Where the power supply is unstable, home entertainment systems are becoming increasingly vulnerable to shot circuits. Power conditioners provide power protection against such events.
When can a power conditioner be plugged in?
Technically, you can daisy-chain a surge protector and a power conditioner, but most power conditioners already feature surge protection. If you have too many devices, you can use this combo and a surge protector, but be cautious. Avoid exceeding your wall outlet’s maximum power. Ideally, your power conditioner and surge protector will be linked to two distinct wall outlets on two separate lines (separate breakers).
Which home theatre power manager should I buy?
Expect to pay over $150 for an excellent power manager that performs everything we discussed. The Furman and Panamax power managers are much over $500. Check out our picks for the finest home theatre power managers.
Can I use a power conditioner for all my studio gear?
You can. And you should if you have noise difficulties and can’t find the source. Just make sure that your home/studio appliances aren’t producing the noise. A refrigerator is one of the common sources of audio equipment noise. If the noise persists, unplug it. Repeat with other appliances. If that works, you might not require a power conditioner. You can save money by buying a basic surge protector.
Do power conditioners daisy chain?
Daisy-chaining two power conditioners is possible in some cases, but not recommended. Connect two power conditioners to separate wall outlets on separate lines (breakers).
Want to link two power conditioners together (probably for extra outlets)? Consider your current power usage and the equipment already connected. Consider the load you’re placing on one wall outlet. if the load is too large, utilize two separate wall outlets. If it’s simply digital equipment, you can probably daisy-chain two power conditioners. But we still advise against it.
Why do some audiophiles advocate against power conditioners?
Power conditioners can provide a false feeling of security to those unfamiliar with home audio systems. Some audiophiles consider them “no-nos” since they make it difficult, if not impossible, to distinguish between different sources in an audiophile environment!
These devices have two flaws. Second, because each kind functions differently based on its output qualities – some more apparent than others-
so think about it. If you’re like most people, Home Theater is a big deal. It’s a place to unwind and get away from it all. But what if your Home Theater system was actually adding to your stress? It’s possible if you use one of the numerous popular power management gadgets on the market today.
Is a UPS a power conditioner?
No. A UPS is not a power conditioner. Uninterruptible Power Supply This device features a backup battery that gives you a few extra minutes during a power outage to turn off your devices. A power conditioner, on the other hand, safeguards, filters, and distributes electricity to your equipment.
How long do power brokers survive?
Power managers and power conditioners are designed to be long-lasting. The majority of power conditioners and power managers have a lifetime warranty. It makes sense because a power management is designed to extend the life of your electronic devices. As a result, it’s hardly surprising that they’ll live much longer lives. At the same time, you must take good care of your power brokers to ensure they live out their lives.
What exactly is the distinction between a line conditioner and a surge protector?
As previously stated, a line conditioner manages your electrical current in continuity, but a surge protector only comes into play when a threshold is exceeded (preset). Both of these elements are present in the majority of power managers.
Do power conditioners improve the quality of sound?
Power conditioners do, in fact, increase sound quality. In what way? Electronic noise can be extremely irritating. The frequency range of a speaker/home theatre is vulnerable to buzz and hum sounds. A power conditioner ensures that this buzz and hum are eliminated by reducing all types of distortions, or noise reduction.
What exactly is the distinction between a surge protector and a power strip?
The difference between a power strip and a surge protector is that a power strip merely adds extra outlets, whereas a surge protector protects your electrical equipment and, in this example, home theatres from potentially destructive power spikes. Because surge protection is critical, we strongly advise utilizing surge protectors in conjunction with power strips.
Are power conditioners effective at reducing noise?
Noise reduction is one of the most common applications for a power conditioner. Noise filters are used by power managers to further reduce noise.
Where should a power conditioner be installed?
Users frequently disagree over whether a power conditioner should be placed at the top or bottom of the rack. Because of the wiring and connections that must be connected to the power conditioner, most people place them near the top of the rack. However, some of these power conditioners may generate magnetic waves, which may cause interference with your AV equipment. Those who are experiencing this audio problem should place their power conditioners near the bottom of the rack!
Are Furman power conditioners reliable?
To begin, each on their own. Second, Furman power conditioners are excellent. They are well-known for being some of the most cost-effective and efficient power managers available. The Furman M-82 is one of the best-selling budget-friendly power managers. It is only one of many power managers from Furman that have proven to be popular with users.
Final Thoughts – Top 10 Home Theatre Power Manager
So, which one of these power conditioners is the best of the bunch? Determining which power conditioner is best for you is entirely up to your own personal preference. The Furman PL-8C and Panamax M5400-PM would be near the top of our list if we had to make suggestions. You should keep in mind that they will cost you a lot of money, but consider how much money they will save you by keeping the costly equipment that you value.
They are vital for securing not just your home theatre system but also any other electronic gadgets you may have in your home. Consider which characteristics are important to you when purchasing the best power management. You can also refer to our list of the five best power managers for home theatres to help you make the best decision.